Raven Cruizer II Operator's Manual download pdf (Page 83)

Manual No. 016-0171-093 77

SmartRow Cruizer Interface and Calibration

Planter Screen

1. From the home screen, touch Tools, System, then Planter to setup the planter sections.

Look Ahead

SmartRow allows you to pre-program Turn-On and Turn-Off Look Ahead times. SmartRow monitors

the GPS position and as-applied map while considering the Look Ahead times to begin turning

sections on or off before they cross plant or no plant boundaries. Look Ahead times can help

compensate for delays in the planter system including the time it takes for planter clutches to open and

close. The specific Look Ahead time is a function of the valve timing and the speed at which the

operator is driving the machine.

Percent Coverage

SmartRow provides the ability to pre-define the amount of coverage SmartRow will apply. For most

applications that require complete coverage, the Percent Coverage should be set to 100 percent. For

applications that will not tolerate overlap, the Percent Coverage should be set to a lower value.

SmartRow allows a Percent Coverage value anywhere from 5 to 100 percent in increments of 5

percent.

SmartRow Override

SmartRow provides you the ability to momentarily override the SmartRow feature and force all boom

sections on. This may be desired if you want to double up coverage on an area of the field. The

override feature is also used when starting off from a dead stop. Enable the SmartRow Override

feature and allow the boom valves to open up before driving ahead. The amount of time for the

override can be modified to match your specific application needs.

Touch the Home Icon to return to the home screen.

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 97 98

No comments

Raven Cruizer II Operator's Manual Page 83