Raven Cruizer II Operator's Manual download pdf (Page 41)

Manual No. 016-0171-093 35

SmartRow Front Panel Display

You can navigate to the different screens under the Create No Plant Zn screen by pressing either the

or key. For example, you can set up the No Plant Offset by pressing from the Create No

Plant Zn screen.

Note: You can return to the Home Screen anytime by pressing the and keys at the

same time.

No Plant Zone Offset Screen

To get to No Plant Offset screen press from the last Create No Plant Zn screen.

The No Plant Offset screen displays the orientation of the No Plant Zone with respect to the

implement. If “Left” is selected, then the no plant zone will be created at the end of the left section. If

“Right” is selected, then the no plant zone will be created at the end of the right section. If “Center” is

selected then the no plant zone will be created at the center of the sections.

Press to edit the offset. The display will begin blinking. Use the or key to toggle between

selections. Press the key again to apply your selection.

Start No Plant Zone Screen

To get to the Start No Plant 1 screen press from the No Plant Offset screen.

The lower left hand corner of the Start No Plant 1 screen shows the orientation of the no plant zone

with respect to the planter section. “NSL” indicates the end of the left boom will be used. “NSR”

No Plant Offset

Left

RAVEN

HOME

INDUSTRIES

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 97 98

No comments

Raven Cruizer II Operator's Manual Page 41