Raven Envizio Pro Specifications download pdf (Page 48)

Chapter 5

38 Envizio Pro and Envizio Pro II Installation and Operation Manual

Initial Setup Wizard

The initial setup wizard will automatically begin when the Envizio Pro or Envizio Pro II is powered up for the first

time. This wizard will step through the initial settings and calibration values required for operation of the field

computer and control system. This process should only take a few minutes to complete and is only required

during the initial power up sequence.

Any values or settings programmed during the initial setup wizard can be modified or refined later through the

Tools Menu.

Note: Many of the values entered in the initial setup wizard are required for guidance and/or product

control features of the control system. Therefore, the more accurate these values can be

measured, the more accurate the control system will be.

The following sections may help complete the initial setup wizard. To confirm the settings displayed on a

screen and proceed with the initial setup wizard, touch the ‘Next’ or ‘Accept’ icons. If available, the ‘Previous’

icon will step back to the previous Setup screen.

Region

The first screen displayed during the initial setup wizard is the Region screen. Select the preferred language

and units for display on the field computer.

• Metric - centimeters, liters, hectares, kilometers per hour

• English - inches, gallons, acres, miles per hour

• Turf Units - inches, gallons per 1000 square feet, miles per hour

Select the desired units of pressure to be used with an optional Glide Series AutoBoom system.

• kilo Pascals

• pounds per square inch

Time Zone Settings

Touch the Time Zone icon in the upper right corner to view and modify time zone settings. The default

selections will allow the field computer to automatically configure the time zone and daylight savings for the

region of operation. To manually change the time zone, select the ‘Manual Time Zone’ option and enter the

UTC (Coordinated Universal Time) offset hours for the local time zone.

Guidance Width

The guidance width should be entered as the width of the boom, implement or header which actually

completes an operation while the vehicle drives a swath. For example, the measured guidance width for a

sprayer boom should not include fence row nozzles or foam markers and the guidance width of a combine

header should be the cutting surface, not the overall header width.

Use the on-screen keypad to enter the guidance width in inches (English) or centimeters (Metric) for the boom,

implement or header.

Previous Next Accept

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 231 232

Vikitpe 04 Jan 2024 | 11:57:38

urenrjrjkvnm

Raven Envizio Pro Specifications Page 48