Raven Envizio Pro Specifications download pdf (Page 161)

Manual No. 016-0171-148 151

Using AccuBoom™

To enable the AccuBoom Override:

1. Touch this icon to display the AccuBoom Popup.

2. Touch the Override button. AccuBoom section control will toggle all sections on for the number of seconds

displayed.

The On Override feature is useful when backing into corners during boundary spraying, to begin applying

product from a complete stop or to apply additional product to specific area of a field.

Note: Touch the Next icon to quickly access the AccuBoom Configuration screen while a job is in

progress.

Section Selection

The section selection feature allows the operator to select which sections will be controlled by AccuBoom.

For example, if the machine has fence row nozzles which the operator wants to control manually, deselect the

corresponding sections on the Section Selection screen by removing the green check below the desired

sections. The vehicle’s individual section switches must be used to manually turn the fence row nozzles on or

off.

Note: With the AccuBoom feature installed, the status of the boom sections may appear as follows:

• Green - The boom section is currently on. AccuBoom will control this section if AccuBoom

control has been enabled and any section switches in the machine are in the on position.

• Amber - The boom section is currently off, but AccuBoom control is enabled for the boom

section. AccuBoom has shut off this section due to coverage or spray-zone mapping.

• White - The boom section is currently off and AccuBoom control is disabled for the section.

AccuBoom will not control this section automatically.

Aggressiveness Factor

The look-ahead values set the amount of time ahead of the vehicle (based on vehicle speed) which the field

computer will scan for zone boundaries or unapplied areas when turning boom sections on or off. By default,

AccuBoom overrides any additional zone boundaries detected until the look-ahead time has passed. For

example, if the turn-on look-ahead value is set to 5 seconds and AccuBoom detects an unapplied area 5

seconds ahead of a boom section, AccuBoom toggles that section on and will ignore subsequent commands

to turn that section off until the section has entered the unapplied area.

For sections at the end of larger booms or where sharp turns or aggressive maneuvering is necessary, this

override may cause unexpected skips in coverage. The aggressiveness factor uses the user defined look-

ahead values to adjust AccuBoom response for these driving styles and/or field areas requiring aggressive

1 2 ... 156 157 158 159 160 161 162 163 164 165 166 ... 231 232

Vikitpe 04 Jan 2024 | 11:57:38

urenrjrjkvnm

Raven Envizio Pro Specifications Page 161