Raven Cruizer II User Manual Page 26

  • Download
  • Add to my manuals
  • Print
  • Page
    / 44
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 25
24 Cruizer II™ Operation Guide
2. Touch the Settings Lock and
use the No. of Sections selector or
Keypad to set the number of
available sections (maximum 10)
on the implement. The Cruizer II
will automatically divide the
configured swath width by the
selected number of sections.
3. The list of configured sections is
displayed below the No. of
Sections slider. This list is
automatically updated if the number of sections is adjusted. Use the up or
down arrows to display additional section settings if necessary.
Note: Section 1 corresponds to the left most section (as observed from the
operator cabin facing forward) in a standard boom configuration.
4. Touch any of the displayed section values (width, left/right or fore/aft) and
use the displayed keypad to enter a new value for the section setting.
Note: The configured swath width and total AccuBoom section width is
displayed in the lower, left corner of the Sections screen.
Touch the displayed AccuBoom width to enter a different total section
width. The Cruizer II will automatically divide the new width by the
selected number of sections. In a standard boom configuration, the
Swath and total AccuBoom section widths should be equal values.
5. Touch Center Sections at the bottom of the screen to automatically
align configured sections end-to-end centered on the swath midpoint.
6. Touch the Accept icon to save the displayed settings and return to the
Tools Menu.
AccuBoom Sprayer Setup
The Sprayer screen allows the operator to customize the response of the
AccuBoom system for the specific control hardware installed on the
implement.
1. From the Home Screen, select
Tools Menu System Sprayer .
2. Use the sliders or touch the
keypad icons to set the following
settings:
Note: Touch the Home icon at any
time to return to the Home
Screen.
Number of
Sections Slider
Center Sections
Settings Lock
Page view 25
1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 43 44

Comments to this Manuals

No comments